 |
||
|
About Us Contact Us Our Products |
Overhead Sizing & Distribution System BUS-Based Controller |
|
|
The Brain Behind the GS-1000 System The standard easy-to-operate BUS-base system controller includes a computer controller, monitor and keyboard. It is typically installed in a plant floor office control center for easy monitoring by plant personnel. · Controls up to 32 unloaders: ample drop options for every department in further processing. · Selectable unloader priority: allows for prioritized drops according to parameters dictated by specific customer needs. · Line stretch compensation: automatically compensates, so drops will always activate at the right moment, no matter what the level of line wear. · Alternate unloading: enables pre-set unloading of product into specified bins, then alternating to other bins when one is filled ... all without stopping the line. · Birds per minute/extended range and grade: targets the desired number of birds per minute for a given onloader. The system will also refer to extended weight and grade ranges set up by the user to assure the birds-per-minute goal is achieved. · Pre-set batch count: system adheres to a pre-set drop count at a specific drop point, until the vat is removed and the drop is reset. · Selectable weight units: displays in grams, ounces, pounds or kilograms. · True weight calculation: measures the weight of each shackle during set-up...then automatically recalculates to reflect true product weight each time a bird is weighed, and displays this to the user. · Multiple production schedules: Industry- leading programming capability allows up to four individual production schedules and parameters to be housed in the system. · "Auto zero" feature: software fine-tunes weighing accuracy by automatically compensating for load cell drift or scraps on the weigh deck. |
||
 Made
in the USA |
|
|
|
Home | About Gainco | Products & Services | Contact Us | Site Map | Links |
||
