Check Weigher Technical Information

About Us

Contact Us

Our Products

Check Weigher

Performance:
Capacity:	<5 lbs., 60 boxes per minute
	>5 lbs., 40 boxes per minute
	60 bags per minute
Range: 0 to 5 lbs.
Accuracy: ± 0.05 lbs.
System Linearity: 0.01% full scale
Electrical:
230/240 volt 50/60 Hz 3 phase
30 amp maximum
Controller/Indicator:
Communications:
RS232: 3 serial bi-directional ports
1 TTL level bi-directional
Baud Rate: selectable 150-19200 b/sec
Protocol: Modbus®
Optional RF transceiver for RF asynchronous data collection.
Control System Software:
One button set-up for each bag or box size and over and under.
Physical:
General:
300 series stainless steel construction with tubular frame and adjustable legs.
In-Feed Conveyor:
Van der Graaf Motor
UHMW in-feed top
1100 series Intralox belt
Weighbridge Conveyor:
Van der Graaf Motor
1100 series Intralox belt
Two, stainless steel load cells
Out-Feed Conveyor:
Van der Graaf Motor
UHMW out-feed top
1100 series Intralox belt
Knock-Off System:
Electronically controlled pneumatic UHMW pusher for box and UHMW arm for bags.

Made in the USA